The Model P-100WM is the smallest oil filter crusher in the product line. This model is for crushing AUTOMOTIVE and LIGHT TRUCK FILTERS. The P-100WM is ideally suited for small to medium size maintenance shops where autos, vans, etc. are maintained.

It is made to mount on a shop wall near the lube and waste oil area. A drain located directly below the crushing area allows the waste oil removed during the crushing process to be plumbed either into a drum or bulk tank. The rear of the unit is key-holed for easy installation

For additional information

 The Model P-200L is the most popular oil filter crusher model for crushing heavy duty truck filters. The P-200L accepts filters up to 16" tall and crushes multiple automotive size filters at once. Crushed filters are deposited through a trap door in the rear of the crushing chamber directly into a 55 gallon transport drum that can be positioned under the machine. The P-200L requires no air supply and uses a fully self contained electric/hydraulic power unit.

This system provides consistent crushing force without the need for any air supply. The user has total hands free operation. A push button control activates the system and a built-in safety mechanism prevents the machine from operating when the loading door is open.

SPACE SAVER
Space is important in any shop. The P-200L allows you to position your filter drum directly under the machine. The unique trap door allows the crushed filters to go directly into the transport drum without having to be manually removed. Since you already have a drum, the total extra space required for the machine is just 2 square feet.

For additional information

The Model P-300 provides more crushing force than any competitor, crushing oil filters up to 20" tall, multiple smaller filters at once, and oily shop rags. The large crushing chamber also allows crushing five gallon paint cans into thin wafers. With over 70,000 pounds of crushing force, the P-300 removes the maximum oil possible from used filters! This eliminates the fabric mess and disposal problem typical when cutting filters. Crushed filters are deposited through a trap door in the rear of the crushing chamber directly into a transport drum. The P-300 includes legs to house two 55 gallon drums under the machine. One drum can be used for crushed filters and the other for waste oil. A drain located under the crushing chamber allows for waste oil to be plumbed directly to a drum or bulk tank.

All operation is provided by a fully self-contained, electric/hydraulic power unit. This provides consistent crushing force without the need for high volume air supply, condensation filters and lubricators necessary with air units. A push button control activates the system and a built in safety mechanism prevents the machine from operating when the loading door is open.

SPACE SAVING
Two 55 gallon filter drums are positioned under the machine (not included).
One drum holds the crushed filters, the other holds the waste oil. Or plum waste oil direct to a bulk tank. Trap door allows crushed filters to be deposited directly into the drum without having to be manually removed. Total extra space required for the machine is 4 square feet.

For additional information

The Model P-350 is the largest of our production-run oil filter crushers. It is built to specifically address the needs of railroad customers and will crush up to three 36" locomotive oil filters per cycle. The Model P-350 can also be used to crush large, specialty oil filters from ships and heavy equipment. The P-350 will also crush multiple 5 gallon paint cans per cycle.

For additional information

The Model D-60 is a dual purpose machine. This Drum Crusher can be used to compact waste inside the drum or to crush the empty drum itself. By compacting waste into the drum you can realize dramatic savings in handling and disposal fees by getting up to 80% more material into each drum. 

Typical waste products that our customers are compacting into drums include paint booth air filters, shop rags, cartridge-style oil filters, low-level radioactive waste, laboratory garments, absorbent materials, metal and plastic containers, and glassware.

Alternatively, you may have a lot of used drums that you need to dispose of. The Model D-60 will crush a 55 gallon drum down to 4" in height greatly reducing storage space requirements and transport fees. The Model D-60 will crush drums up to 85 gallons in size.

For additional information