Which TITAN Pad Heater fits my Engine?

Engine Type (Application)
Oil Liquid Capacity (Qrt or L)
Power Source (AC or DC)
Voltage (Volts)

THF100-12


Fuel Filter Heaters

THF100-12

TITAN Fuel Filter Heaters are 0.075" (1.9mm) thin flexible heating pads that are attached to the outside of fuel filters.

The TITAN Fuel Filter Heater incorportes an adjustable velcro band that facilitates the ease of fitment to numerous sizes of oil filters.

Cold weather creates fluid flow problems with fuel and oil filters. Fuel and oil becomes too thick to pass through the fine pores within the filter element; consequently the fuel gels and it won't flow with the result that the engine will not start.

Fuel filters also suffer from additional restrictions if there is any water or moisture in the fuel which will freeze in the filter element.

Engine wear is increased when the flow of lubricating oil is restricted in the filter element.

The TITAN Fuel Filter Heater warms the filter housing to summer temperatures; this unplugs the gel in the oil filter to increase the flow and allows for sufficient fuel flow to start the engine. The fuel temperature will increase above the pour point and melt any fuel/ice slush; this allows sufficient fuel to flow to the injection system ease of engine start up.

The fuel filter heater can be left on while the vehicle is operating on the road.+

TITAN Fuel Filter Heaters can be custom designed for individual commercial applications. 

All prices are in US $$$.

Depth Filter diameter min 3.5", max 5.0" Inches
Width: 4 Inches
Height: 12 Inches
Weight: 0.5 lbs
Output Power: 100 Watts
Amps: 8.3 amps
Voltage (Volts) 12 volts d.c.
Specific Characteristics:
  • Made in the USA
  • UL recognised component
  • RAISES Fuel/ Oil Temperature to un-gel the fluid in the filter
  • IMPROVES Crankability
  • EXTEND Starter Motor Life
  • REDUCES Cold Start Wear
  • REDUCES System Warm-up Time
  • NO Maintenance
  • Electrical cord length 18" with negative and positive lead

    Three Year Warranty



PERFORMANCE IMAGES


HOW TO

Wrap the THF100-12 around the fuel filter and secure with the velcro strap.

The use of a DC contactor for installation, whilst recommended, is not mandatory.


TYPICAL APPLICATION

  • Diesel Fuel Filters
  • Biodiesel Filters
  • Lube Oil Filters
  • Hydraulic Oil Filters
  • Hydraulic Pumps
  • Hydraulic Rams