Which TITAN Pad Heater fits my Engine?

Engine Type (Application)
Oil Liquid Capacity (Qrt or L)
Power Source (AC or DC)
Voltage (Volts)

HS-3


Thermostat

HS3

The HS-3 Heater-Stat is an temperature controlled electrical thermostat outlet. Designed to automatically turn electrical devices on and off  when the ambient temperature drops or raises in accordance with a preset temperature setting; the HS-3 is the ideal device to control the operation of the Oil Pan Heater and Battery Warmer or Block Heater.

The HS-3 plugs into an outdoor 120 volt AC electrical outlet and has two 120 volt receptacles. The maximum electrical load is 1800 watts; this will accommodate both the largest oil pan heater, TH1000-1, and  the battery warmer, TBH60-1, being plugged in together.

The oil pan heater and the battery warmer will be automatically turned on when the ambient temperature falls below 35°F (2°C) and stay on and until the ambient temperature exceeds 45°F (7°C).

Electrical usage and energy cost is consequently reduced.

Depth 1.0 Inches
Width: 3.25 Inches
Height: 1.25 Inches
Weight: 0.25 lbs
Amps: 15 amps
Voltage (Volts) 120 volts a.c.
Specific Characteristics:
  • UL and CSA
  • Fully Automatic.
  • Turns ON oil pan heaters, battery warmers & block heaters only when needed. 
  • Reduces electrical consumption and costs.
  • No special installation required. Just plug it in ......... 
  • Suitable for many other uses, heat tape, tank de-icers, heat lamps, freeze warning devices.
  • Maximum rating, 1800 watts, 15 amps, use with GFCI outlet.

    One Year Warranty

 

 



TECHNICAL SPECS

TITAN_Heater-Stat.pdf